Item - BCR549D1316

Item - BCR549D1316

Item - BCR1249B1284

May 1949 Shure 99D86 Black CR Element 1316 Ohms $299.99

This 1950 Shure 99D86 Controlled Reluctance element is in Excellent Condition and has been tuned for maximum output and tone.  This element has an absolutely fantastic Thick Fat tone with an Amazingly Strong output and bottom End Response and it measures a solid 1316 Ohms on a DMM.  You won't be disappointed with this one!  It's a real Tone Monster!

At 2" in diameter and 5/8" deep these Vintage Turner microphone elements are a Real Heavyweight both in actual size/weight and in their Deep Deep Tone! It only stands to reason that a larger diaphragm produces a deeper tone and the diaphragm on these measure over 1 1/4" across. This model will work well with the 300 Ohm to 25 K-Ohm transformer or the miniature 150 Ohm to 50 K-Ohm transformer and will deliver a Great Deep Warm Tone.

Vintage Turner Lo-Z Dynamic Element  $9.99

These Vintage Small Philips Dynamic elements are one of the best Harp Mic elements available.  The foil diaphragm provides a thick gritty tone and has fantastic frequency response for harmonica with great bottom end. The element is paired with a small transformer which raises the impedance of the element to 100,000 Ohms for a super hot output which is punchier, louder and has more bottom end than most CM or CR elements. The element measures 1-1/8" in diameter and it is 7/8" deep so it will fit virtually any bullet shell and it will even fit into many stick mics.  The transformer is a tiny 9/16" x 1/2" x 7/16" and will fit easily into most any shell.

Vintage Philips Hi-Z Small Dynamic Element  $79.99

This Vintage Shure 99C86 Controlled Magnetic element is in Excellent Condition and with the transformer it has Super Strong Output and Thick Gritty Tone. The transformer measures 1100 Ohms on a DMM and has a pair of color coded leads attached for easy connection. The element has also been tuned to provide the maximum output and tone and is guaranteed to rival most Hi-Z CM or CR elements at a bargain price.

Vintage Shure 99C86 CM Element w/Transformer  $79.99

Vintage Shure 99H86 Hi-Z White CR Element  $129.99

This Vintage Shure 99H86 Controlled Reluctance element is in Good Condition and has Super Strong Output and Thick Gritty Tone.  The element measures 1079 Ohms on a DMM and has a pair of color coded leads attached for easy connection.  This is a nice Fat sounding Controlled Reluctancec element which has beencleaned and tuned to provide maximum output and tone.

This Vintage Shure 99H86 Controlled Reluctance element is in Good Condition and has Super Strong Output and Thick Gritty Tone.  The element measures 1069 Ohms on a DMM and has a pair of color coded leads attached for easy connection.  This is a nice Fat sounding Controlled Reluctancec element which has been cleaned and tuned to provide maximum output and tone.

Vintage Shure 99H86 Hi-Z White CR Element $129.99

CM/CR & Dynamic Microphone Elements

Item - ELPRIMO

Item - ELPRIMO

Item - BCR549D1273

These New Old Stock, New In Box Dynamic elements were used in a number of Vintage Japanese microphones including the Akai DM-13 and some of the Piezo Brand microphones from the same Era (1960s).  These are excellent replacement elements for many Vintage Japanese microphones which use a transformer inside to boost them to High Impedance (such as the microphones previously mentioned.  The element measures 1 1/4" in diameter and 5/8" deep and have a protector over the diaphragm.


This 1949 Shure 99D86 Black Label Controlled Reluctance element is in Excellent Condition.  The element measures 1273 Ohms and has a pair of color coded leads attached for easy connection.  It is a nice Fat Tone CR which has been cleaned and tuned to provide maximum output and tone. . This particular element has Fantastic Output, Breakup and Bottom end Response.  You won't be disappointed!

This 1950 Shure 99D86 Controlled Reluctance element is in Excellent Condition and has been tuned for maximum output and tone.  This element has an absolutely fantastic Thick Fat tone with Excellent output and bottom End Response and it measures a solid 1291 Ohms on a DMM.  Don't let this great element get away!


This Sonotone Dynamic Element is in perfect working condition with Great Vintage Tone.This would make an excellent replacement element for your Sonotone DM10 Dynamic Microphone.Note: This is the element only without the transformer.

Vintage Sonotone Dynamic Element  $19.99

Vintage Philips Big Bottom Hi-Z Dynamic Element  $79.99

These Vintage Philips Dynamic elements are one of the best Harp Mic elements available.  The foil diaphragm provides a nice gritty Chicago style tone and has an absolutely Monstrous Bottom End. The element is paired with a small impedance boosting transformer which raises the impedance of the element to 100,000 Ohms for a super hot output which is punchier and louder than most CM or CR elements. You won't be disappointed if you use one of these in your next build. The element measures 1 9/16" in diameter and it is 7/8" deep.  The transformer is a tiny 9/16" x 1/2" x 7/16" and will fit easily into most any shell

This 1950 Shure 99D86 Controlled Reluctance element is in Excellent Condition and has been cleaned and tuned for maximum output and tone.  This element has an absolutely fantastic Thick Fat tone with Excellent output and bottom End Response and it measures a solid 1284 Ohms on a DMM.  Don't let this great element get away!

  1. This Vintage Electro Voice Model 605 element and transformer is in excellent condition with a good strong output and Excellent Tone!  This is a pull from a working EV605 which was then used to house a Vintage Shure Black Label CR element.  This is an excellent element to use as a replacement for your Dead EV 605 microphone and will also fit an EV 606 or EV 630. 

 Electro Voice EV 605 Element/Xformer   $39.99

Item - ESR99H861588

Item - ESR99H861588

1954 Shure 99H86 White CR Element 1588 Ohms $179.99

This 1954 Shure 99H86 Controlled Reluctance element was dead but has been rewound to 1588 Ohms tuned for maximum output and tone.  This element has an absolutely fantastic Thick Fat tone with an Amazingly Strong output and bottom End Response.  This is an "Overwound" Element with Super Hot Output

You won't be disappointed with this tone Monster!

Item - ELSOND

Item - ELSOND

Item - ELMLD

Item - ELMLD

Item - ELSM99C86XF

Item - ELEV605

Item - ELSR99H862

Item - ELSR99H861

This Vintage Calrad DM51 element is in excellent condition and has a good strong output and nice gritty tone.  The element is 1 3/4" in diameter and 1 3/4" from the face to the back of the affixed transformer.  This is the same model element used the the Calrad DM-17 dynamic microphone and has a 50 K-Ohm output impedance as well as a Low Impedance tap on the transformer for Lo-Z applications.  This is an older model element with a paper tape covering for the transformer windings.   The newer models have red plastic tape over the windings.

 February 1950 Shure 99D86 Black CR Element 1284 Ohms   $299.99

Sold!

Sold!

Sold!

Sold!

Item - BCR1249B1284

December 1949 Shure 99D86 Black CR Element 1284 Ohms $299.99

This 1950 Shure 99D86 Controlled Reluctance element is in Excellent Condition and has been tuned for maximum output and tone.  This element has an absolutely fantastic Thick Fat tone with an Amazingly Strong output and bottom End Response and it measures a solid 1284 Ohms on a DMM.  You won't be disappointed with this one!

Item - ELSR99H861

Item - ELSR99H862

Item - ELEV605

These Vintage Motorola Dynamic Elements have an Absolutely Awesome Deep Rich Tone and at 185 Ohms (actual resistance) they are a great match for either the 300 Ohm to 25 K-Ohm transformer or the miniature 150 Ohm to 50 K-Ohm transformer. The elements measure 1 13/16" in diameter and are 3/4" deep and should fit into most Bullet Style Microphones.

Vintage Motorola Lo-Z Dynamic Element  $12.99

Vintage Calrad DM51 50K-Ohm Dynamic Element   $49.99

Item - BCR549D1273

May 1949 Shure 99D86 Black CR Element 1273 Ohms $299.99

February 1951 Shure 99H86 Black CR Element 1294 Ohms $274.99

This 1950 Shure 99D86 Controlled Reluctance element is in Excellent Condition and is In Excellent Condition and has been tuned for maximum output and tone.  This element has an absolutely fantastic Thick Fat tone with Excellent output and bottom End Response and it measures a solid 1286 Ohms on a DMM.  Don't let this great element get away!


Item - ELPHSD

Item - ELPHSD

Item - ELCALDM51

Item - BCR250D1284

The Harp Mic Shop

Item - BCR251H1294

Item - BCR251H1294

This 1951 Shure 99H86 Black Label Controlled Reluctance element is in Excellent Condition.  The element measures 1294 Ohms and has a pair of color coded leads attached for easy connection.  It is a nice Fat Tone CR which has been cleaned and tuned to provide maximum output and tone. . This particular element has Excellent Output, Breakup and Bottom end Response.  don't let this one get away!

This 1949 Shure 99d86 Black Label Controlled Reluctance element is in Excellent Condition.  The element measures 1328 Ohms and has a pair of color coded leads attached for easy connection.  It is a nice Fat Tone CR which has been cleaned and tuned to provide maximum output and tone. . This particular element has a Super Strong Output and lots of Bottom End!  The label is difficult to read but it looks like 5-49.  It is definitely a 1949 dated element though.

Item - BCR250D1291

Item - BCR250D1291

Item - BCR250D1286

February 1950 Shure 99D86 Black CR Element 1286 Ohms   $299.99

Item - ELCALDM51

Item - ELTLD

Item - ELPHLD

Item - ELMD500

These Vintage Midland Dynamic CB Microphone elements are great sounding elements when paired with a 500 Ohm to 50 K-Ohm transformer to boost the impedance.  They deliver a good strong output with excellent breakup and Tone at a bargain price.  You better get one while they are still available!

Vintage Midland 500 Ohm Dynamic Element - $9.99

Item - ELMD500

Vintage NOS NIB Primo Japanese Dynamic element  $19.99

Item - ELEVD150

This Vintage Electro Voice Dynamic element is a pull from a EV Model M43/U Military Microphone.  It is in Excellent working Condition and was pulled from a working mic that was used to house a Black CR element.  The element measures 1 3/8" in diameter and 5/8" deep and will work as a replacement element for a number of vintage Electro Voice microphones.  You won't find a better looking or operating EV element!

Item - ELEVD150

Vintage Electro Voice 150 Ohm Dynamic Element $24.99

February 1950 Shure 99D86 Black CR Element 1291 Ohms   $299.99

Item - BCR250D1286

Item - ELSM99C86XF

Item - ELTLD

Item - ELPHLD

Item - BCR549D1328

Item - BCR549D1328

May 1949 Shure 99D86 Black CR Element 1328 Ohms $299.99

Item - BCR250D1284